-
Product DescriptionCompany Info.<>
- Model:
- 2QB 210-SAA11
- Material:
- cast aluminum
- Shaft power:
- 0.37 kw
- Blade number:
- 1
- Weight:
- 11 kg
- Turbine head property:
- centrifugal
- Rotational speed:
- 2800
- Matching motor power:
- 0.37 kw
- Applicable scope:
- Electronic automation equipment supporting industries
0.37KW single-phase vortex air pump electronic equipment supporting miniature high-pressure fan
Shanghai Liang Jin Electromechanical Equipment Co., Ltd., single-phase vortex air pump since entering the market, by the majority of new and old users trust and support, the product has low noise, lightweight, large air volume, high pressure, easy to install and other characteristics, a variety of product specifications, learn more about vortex air pump high pressure fan products, please call us!
Whirlpool air pump fault and solution(i) Fan does not rotate
1. Power is not turned on——
2. Motor does not work—— Check motor wiring or replace motor
3. Repair or replace damaged fan head——
4. There are foreign matters stuck in the fan to—— remove foreign matters.
(ii) Increased noise
1, bearing dry lubrication—— plus bearing grease
2, bearing damage—— replacement bearing
3, impeller wear—— replacement impeller or pump head
4. Fasteners loose or fall off——. Tighten fasteners.
5. There are foreign matters in the fan.—— Remove foreign matters or replace the pump head.
(iii) Increased vibration
1, bearing damage—— replacement bearing
2, impeller imbalance to—— remove foreign matter in the impeller or correct the dynamic and static balance
3, spindle deformation—— replacement spindle or pump head
4. The working state enters the turbulent earthquake area—— and adjusts the working state to avoid the turbulent earthquake area.
5. Inlet and outlet air inlet filter screen blocked—— cleaning filter screen
(iv) Temperature rise
1. The inlet temperature is too high—— to reduce the inlet temperature
2, bearing dry lubrication—— plus bearing grease
3. Fan efficiency is reduced—— to remove dust from blade path or replace pump head
4, the working state changes—— to adjust the working state
5, the ambient temperature increases—— to increase the ambient ventilation heat dissipation
(v) Pressure reduction
1. Pump head speed decreases,—— power supply voltage is low or motor fault occurs.
2. Increase pipe network resistance—— and decrease pipe network resistance
3, the working state changes—— to adjust the working state
4. Motor steering reverse—— motor rewiring
(vi) Flow reduction
1. Inlet and outlet air filter blocked—— cleaning filter
2, pump head speed reduced—— power supply voltage is low or motor fault
3. Increase pipe network resistance—— and decrease pipe network resistance
4. Increase and adjust the working state5, motor steering reverse motor rewiring!Small 220V single-phase vortex air pump blowing purposes:1, sewage aeration, aeration in the tank: the use of vortex air pump outlet to transport oxygen to the pool, to ensure the activity of microorganisms, help to decompose pollutants.
2, increase the transmission of air, nitrogen, etc.: the use of outlet pressure pressurized transmission, regardless of pipeline length and resistance, effectively solve the characteristics of insufficient pressure.
3. Line drying: connect the air knife or duckbill pipe to the surface of the object, and dry the debris and water stains on the object with high impact wind speed. 4, conveyor belt transportation: can be used on air platform equipment, so that objects are not easy to damage, but also help workers to carry.
5, soil gas analysis: can be used for the analysis of circulating gas, can also be adsorbed into a container for gas inspection analysis.Suction Purpose:
1, dental equipment: the use of vortex air pump suction, the saliva in the mouth adsorbed into a container, conducive to cleaning, more conducive to oral cleaning work
2, engraving equipment: adsorption to the surface of the object, conducive to laser or tool grinding or engraving.
3, edging machine: after polishing the object, the object can be concentrated in one place by suction, which is easy to handle and also conducive to hygiene.
4, grain suction machine: grain from one place to another, can also be used for sampling analysis processing.
5, packaging machine: with the large suction of the vortex air pump, the large soft objects are adsorbed into small pieces, which is convenient for storage or transportation.
- Name（chinese）
- 上海梁瑾机电设备有限公司
- Name（English）
- Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd.
- China credit code
- 91310117MA1J15Y444 Identity Verification
- Registered Capital
- 1,000,000 CNY
- Operating term
- 2016-03-10 ~ 2036-03-09
- Address
-
Minhang District, Shanghai, China
- Nearby port
- Shanghai
Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd. is located in Songjiang District, Shanghai, in the center of the Yangtze River Delta. The focus of the company's establishment is to provide consultation on technical problems of service packages to customers in various provinces and cities in the Yangtze River Delta and East China region. The company has many top R & D engineers in today's wind turbine industry, and Liang Jin brand has been devoted to R & D and upgrading for more than 20 years. It has successively developed new fluid products for chemical and agricultural supporting equipment such as annular high-pressure fans, explosion-proof blowers, frequency conversion blowers, anti-corrosion fans, suction blowers, etc. He has deep attainments in high-pressure fans and vacuum pumps, and is a well-deserved leader in the fan industry! Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd. makes use of today's world's cutting-edge advanced technologies and management concepts to create a characteristic corporate cultural atmosphere with values of "perseverance, enterprising spirit, responsibility, and gratitude", and strives to build an efficient peak operation team. The company has achieved extraordinary leapfrog development. We have created the spirit and influence of "Liang Jinren" with greater significance for the reform era; and strive to create an all-round and three-dimensional online marketing service team. Our products are exported to Singapore, new Zealand, India, Vietnam, Australia, Myanmar, the Middle East, Europe and the United States, and are spread across the Taiwan Strait of China. We have established strategic partnerships with many well-known domestic companies and are the preferred supplier for mechanical automation equipment manufacturers! Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd. adheres to the strategic positioning of "stable and fast technology", adopts the business philosophy of "customer demand-oriented, win-win with customers", treats everything with the mentality of "details determine success or failure", and adopts "digital result-oriented" thinking model requires every employee to allow customers to share the progress of science and technology and the sense of accomplishment and pride of international brands for a long time! "Liang Jin Quality and Integrity World"-Shanghai Liang Jin Mechanical and Electrical Equipment Co., Ltd. welcomes you!- Name（chinese）
- 上海梁瑾机电设备有限公司
- Name（English）
- Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd.
- China credit code
- 91310117MA1J15Y444 Identity Verification
- Registered Capital
- 1,000,000 CNY
- Operating term
- 2016-03-10 ~ 2036-03-09
- Address
-
Minhang District, Shanghai, China
- Nearby port
- Shanghai
Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd. is located in Songjiang District, Shanghai, in the center of the Yangtze River Delta. The focus of the company's establishment is to provide consultation on technical problems of service packages to customers in various provinces and cities in the Yangtze River Delta and East China region. The company has many top R & D engineers in today's wind turbine industry, and Liang Jin brand has been devoted to R & D and upgrading for more than 20 years. It has successively developed new fluid products for chemical and agricultural supporting equipment such as annular high-pressure fans, explosion-proof blowers, frequency conversion blowers, anti-corrosion fans, suction blowers, etc. He has deep attainments in high-pressure fans and vacuum pumps, and is a well-deserved leader in the fan industry! Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd. makes use of today's world's cutting-edge advanced technologies and management concepts to create a characteristic corporate cultural atmosphere with values of "perseverance, enterprising spirit, responsibility, and gratitude", and strives to build an efficient peak operation team. The company has achieved extraordinary leapfrog development. We have created the spirit and influence of "Liang Jinren" with greater significance for the reform era; and strive to create an all-round and three-dimensional online marketing service team. Our products are exported to Singapore, new Zealand, India, Vietnam, Australia, Myanmar, the Middle East, Europe and the United States, and are spread across the Taiwan Strait of China. We have established strategic partnerships with many well-known domestic companies and are the preferred supplier for mechanical automation equipment manufacturers! Shanghai Liangjin Mechanical and Electrical Equipment Co., Ltd. adheres to the strategic positioning of "stable and fast technology", adopts the business philosophy of "customer demand-oriented, win-win with customers", treats everything with the mentality of "details determine success or failure", and adopts "digital result-oriented" thinking model requires every employee to allow customers to share the progress of science and technology and the sense of accomplishment and pride of international brands for a long time! "Liang Jin Quality and Integrity World"-Shanghai Liang Jin Mechanical and Electrical Equipment Co., Ltd. welcomes you! -
Send your message to this supplier*From:*To:
Mr. yangqi
*Message:
Copyright © 2003 - 2025 Goepe.com All rights reserved.